This is where the hole is
Now this is the engine of my camry if you can see the red wire that's is coming from the battery terminal to the back of the car. Your average person installing a wire through the front will try to drill a new hole to get the wire from the engine to the inside of the car. Most cars already have these hole because there are wires that are already ran thorough the front so before you do that try and see if there is already a hole and save your self some time.
This is the left side very easy to do it is same as the right side. All you have to do is screw two screws to the mount and on to the bumper and two more screws that will hold the light in the mount. I would not suggest to mount it under the bumper because if the car bottems out it might take the fog lights with it.
This is probally one of the most easy wireing project that I had done. It took me less then an hour. I belive the hard part in this was getting the wire thur the firewall to reach the switch. The mounting of this lighting is 4 simple screws 2 on the body and 2 screws on the mount.
This is my fog light project
